CNS Standards Solution | HOME | LOGIN | SIGN UP | CONTACT US | 中文版 |
�� ��

Chinese National Standards
中華民國國家標準
- Taiwan 台灣 -
 

"Read " CNS Standards List

B-Mechanical Engineering
CNS 4317    2020 Edition
Designation of Screw ThReads
螺紋標示法

Translated
B-Mechanical Engineering
CNS 530    2020 Edition
Iso Metric Screw ThReads-Tolerances-Limits of Sizes for Commercial Bolt and Nut Threads--Medium Quality
公制螺紋公差(ISO制)(商用內、外螺紋之限界尺寸–中品級)

Translated
B-Mechanical Engineering
CNS 531    2020 Edition
Iso Metric Screw ThReads-Tolerances-Deviations for Constructional Threads
公制螺紋公差(ISO制)(結構用螺紋之偏差)

Translated
B-Mechanical Engineering
CNS 4370    2020 Edition
Round ThRead with Clearance and Flat Flank with Pitch 7mm (Limits of Size and Deviation--Tolerances and Permissible Wear of Thread Gauges)
圓螺紋(具有間隙淺螺腹、螺距為7mm之限界尺寸和偏差螺紋量規之公差和許可磨損)
B-Mechanical Engineering
CNS 4245    2020 Edition
Clearance Holes for Metric Bolts (1.6 up to and Including 150 mm ThRead Diameter)
穿通孔徑(螺紋直徑1.6公釐~150公釐)
B-Mechanical Engineering
CNS 497    2020 Edition
ISO Metric Coarse Screw ThReads
公制粗螺紋(ISO制)

Translated
B-Mechanical Engineering
CNS 10792    2020 Edition
Metric Tapered External Screw ThReads with Mating Parallel Internal Screw Threads (Nominal Dimensions and Permissible Deviations)
公制推拔外螺紋與配用之平行內螺紋(標稱尺度及公差)
B-Mechanical Engineering
CNS 532    2020 Edition
Limits of Size and Tolerances for ISO Metric Coarse Screw ThReads (Tolerance Quality:Fine,Tolerances:4H、5H and 4h)(Diameters from 1 to 68 mm and Pitches 0.25 to 6 mm)
公制粗螺紋限界尺寸及公差(ISO制)(細品級–4H、5H、4h)(標稱直徑1至68mm,螺距0.25至6mm)
B-Mechanical Engineering
CNS 500    2020 Edition
ISO Metric Fine Screw ThReads (Diameters from 4 to 8mm and Pitches 0.5 to 0.75mm)
公制細螺紋3(ISO制)(標稱直徑4至8公釐,螺距0.5至0.75公釐)

Translated
B-Mechanical Engineering
CNS 3138    2020 Edition
Length of Bolt and Length of Effective ThRead Part for Square Head Bolts
方頭螺栓長度及螺紋長度
B-Mechanical Engineering
CNS 4545    2020 Edition
Limits of Sizes and Tolerances for ISO Metric Coarse Screw ThReads (Tolerance Quality: Coarse,Tolerances: 7H and 8g)(Diameters from 3 to 68mm and Pitches 0.5 to 6mm)
公制粗螺紋限界尺寸及公差(ISO制)(粗品級–7H、8g)(標稱直徑3至68mm,螺距0.5至6mm)
B-Mechanical Engineering
CNS 4548    2020 Edition
Limits of Sizes and Tolerances for ISO Metric Fine Screw ThReads (Tolerance Quality: Coarse,Tolerances: 7H and 8g)(Diameters from 4 to 300mm and Pitches 0.5 to 6mm)
公制細螺紋限界尺寸及公差(ISO制)(粗品級–7H、8g)(標稱直徑4至300mm,螺距0.5至6mm)
B-Mechanical Engineering
CNS 519    2020 Edition
Limit of Whitworth ThReads (Fine Fit)
韋氏螺紋限界尺寸(精配)
B-Mechanical Engineering
CNS 3126    2020 Edition
Bolts, Screws and Studs-Nominal Lengths, and ThRead Lengths
螺栓、螺釘、螺樁之長度及螺紋長度
B-Mechanical Engineering
CNS 4219    2020 Edition
General Terms of Screw-ThReads
螺紋一般名詞
B-Mechanical Engineering
CNS 499    2020 Edition
ISO Metric Fine Screw ThReads (Diameters From 1 to 3.5mm and Pitches 0.2 to 0.35mm)
公制細螺紋2(ISO制)(標稱直徑1至3.5公釐,螺距0.2至0.35公釐)

Translated
B-Mechanical Engineering
CNS 498    2020 Edition
ISO Metric Fine Screw ThReads (General)
公制細螺紋1(ISO制)(總則)

Translated
B-Mechanical Engineering
CNS 4372    2020 Edition
Round ThRead with Clearance and Steep Flank with Pitch 7mm (Limits of Sizes and Deviations--Tolerances and Permissible Wear of Thread Gauges)
圓螺紋(具有間隙,深螺腹,螺距7mm之螺紋限界尺寸和偏差螺紋量規之公差和許可磨損)
B-Mechanical Engineering
CNS 3981    2020 Edition
Dimensions of tapping screws thRead
自攻螺釘螺紋尺度
B-Mechanical Engineering
CNS 4546    2020 Edition
Limits of Sizes and Tolerances for ISO Metric Fine Screw ThReads (Tolerance Quality: Fine,Tolerances: 4H、5H and 4h)(Diameters from 1 to 300mm and Pitches 0.2 to 6mm)
公制細螺紋限界尺寸及公差(ISO制)(細品級–4H、5H、4h)(標稱直徑1至300mm,螺距0.2至6mm)
B-Mechanical Engineering
CNS 4544    2020 Edition
Limits of sizes and tolerances for ISO metric coarse screw thReads (Tolerance quality: medium, tolerances: 5 H、6 H and 6 h、6 g)(Diameters from 1 to 68 mm and pitches 0.25 to 6 mm)
公制粗螺紋限界尺寸及公差(ISO制)(中品級–5H、6H、6h、6g)(標稱直徑1至68mm,螺距0.25至6mm)
B-Mechanical Engineering
CNS 495    2020 Edition
Taper Pipe ThReads
推拔管螺紋
D-Automotive & Aircraft Engineering
CNS 8233    2020 Edition
Tyre Valve ThRead for Automobiles
汽車輪胎氣門嘴螺紋
B-Mechanical Engineering
CNS 4547    2020 Edition
Limits of Sizes and Tolerances for ISO Metric Fine Screw ThReads (Tolerance Quality: Medium,Tolerances: 6H and 6h、6g)(Diameters from 2.5 to 300mm and Pitches 0.35 to 6mm)
公制細螺紋限界尺寸及公差(ISO制)(中品級–6H、6h、6g)(標稱直徑2.5至300mm,螺距0.35至6mm)
B-Mechanical Engineering
CNS 521    2020 Edition
Limit of Whitworth ThReads (Medium and Coarse Fits)
韋氏螺紋限界尺寸(中配及粗配)
B-Mechanical Engineering
CNS 4220    2020 Edition
Terms of Fasteners for Kinds of Screw-ThReads
結件名詞定義(螺紋種類)
K-Chemical Industry
CNS 15200-3-1    2020 Edition
Method of test for paints – Part 3–1: Film formability of paints – Assessment of natural spReading rate (Brush application)
塗料一般試驗法-第3-1部:塗膜形成性-塗布面積(刷塗)
B-Mechanical Engineering
CNS 493    2020 Edition
Fine Whitworth ThRead (Diameter Ranging From 20 to 189 mm, with Tip Clearance)
韋氏細螺紋(尖端有空隙,直徑自20至189公釐)
B-Mechanical Engineering
CNS 4319    2020 Edition
ISO Miniature Screw ThReads-Limits of Size
公制精細小螺紋限界尺(ISO制)

Translated
B-Mechanical Engineering
CNS 520    2020 Edition
Tolerance of Whitworth ThReads (Medium and Coarse Fits)
韋氏螺紋偏差及公差(中配及粗配)

Find out:327Items   |  To Page of: First -Previous-Next -Last  | 1 2 3 4 5 6 7 8 9 10 11

 

| HOME | LOGIN | SIGN UP | CONTACT US | 中文版 | ©  CNS-standards.org Copyright  2001-2025 All Rights Reserved
The authority agency link :
Bureau of Standards, Metrology & Inspection M.O.E.A.
This site is not affiliated with or endorsed by the BSMI or MOEA.