"limit" CNS Standards List |
|
CNS 16184
2023 Edition Emission safety of combustible air fresheners − Methodology for the assessment of test results and application of recommended emission limits 可燃性空氣清新劑逸散安全－試驗結果評定法及建議逸散限值之應用 |
|
|
|
CNS 15080
2022 Edition Maximum volatile organic compound content limit value for architectural coatings 建築用塗料之揮發性有機化合物(VOC)最大限量值 |
|
|
|
CNS 60282-1
2022 Edition High-voltage fuses − Part 1: Current-limiting fuses 高電壓熔線－第1部：限流熔線 |
|
|
|
CNS 15080
2022 Edition Maximum volatile organic compound content limit value for architectural coatings 建築用塗料之揮發性有機化合物(VOC)最大限量值 |
|
|
|
CNS 5088
2021 Edition Methods of test for liquid limit, plastic limit, and plasticity index of soils 土壤液性限度試驗、塑性限度試驗及塑性指數決定法 |
|
|
|
CNS 12357
2021 Edition Temperature limitation of Low Voltage Insulated Wires. 低壓絕緣電線最高容許溫度 |
|
|
|
CNS 533
2021 Edition limit Gages for Metric Coarse Screw Threads 公制粗螺紋限界量規 |
|
|
|
CNS 11445-9
2021 Edition Noise limits of rotating electrical machines 旋轉電機之噪音限度 |
|
|
|
CNS 536
2021 Edition limit Gages for Unified Fine Screw Threads 統一制細螺紋限界量規 |
|
|
|
CNS 6773
2021 Edition Permissible limits of Visual Defects for Insulating Porcelains 絕緣瓷器之外觀檢查 |
|
|
|
CNS 535
2021 Edition limit Gages for Unified Coarse Screw Threads 統一制粗螺紋限界量規 |
|
|
|
CNS 2779-1
2020 Edition Sampling procedures for inspection by attributes − Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection 計數值檢驗抽樣程序－第1部：依允收品質界限(AQL)檢索之逐批檢驗抽樣方案 |
|
|
|
CNS 9445-1
2020 Edition Sampling procedures for inspection by variables − Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL 計量值檢驗抽樣程序－第1部：單一品質特性與單一允收品質界限(AQL)逐批檢驗依AQL檢索之單次抽樣計畫 |
|
|
|
CNS 530
2020 Edition Iso Metric Screw Threads-Tolerances-limits of Sizes for Commercial Bolt and Nut Threads--Medium Quality 公制螺紋公差（ＩＳＯ制）（商用內、外螺紋之限界尺寸–中品級） |
Translated |
|
|
CNS 4370
2020 Edition Round Thread with Clearance and Flat Flank with Pitch 7mm (limits of Size and Deviation--Tolerances and Permissible Wear of Thread Gauges) 圓螺紋（具有間隙淺螺腹、螺距為７ｍｍ之限界尺寸和偏差螺紋量規之公差和許可磨損） |
|
|
|
CNS 532
2020 Edition limits of Size and Tolerances for ISO Metric Coarse Screw Threads (Tolerance Quality:Fine,Tolerances:4H、5H and 4h)(Diameters from 1 to 68 mm and Pitches 0.25 to 6 mm) 公制粗螺紋限界尺寸及公差（ISO制）（細品級–4H、5H、4h）（標稱直徑1至68mm，螺距0.25至6mm） |
|
|
|
CNS 4545
2020 Edition limits of Sizes and Tolerances for ISO Metric Coarse Screw Threads (Tolerance Quality: Coarse,Tolerances: 7H and 8g)(Diameters from 3 to 68mm and Pitches 0.5 to 6mm) 公制粗螺紋限界尺寸及公差（ISO制）（粗品級–7H、8g）（標稱直徑3至68mm，螺距0.5至6mm） |
|
|
|
CNS 4548
2020 Edition limits of Sizes and Tolerances for ISO Metric Fine Screw Threads (Tolerance Quality: Coarse,Tolerances: 7H and 8g)(Diameters from 4 to 300mm and Pitches 0.5 to 6mm) 公制細螺紋限界尺寸及公差（ISO制）（粗品級–7H、8g）（標稱直徑4至300mm，螺距0.5至6mm） |
|
|
|
CNS 519
2020 Edition limit of Whitworth Threads (Fine Fit) 韋氏螺紋限界尺寸（精配） |
|
|
|
CNS 4372
2020 Edition Round Thread with Clearance and Steep Flank with Pitch 7mm (limits of Sizes and Deviations--Tolerances and Permissible Wear of Thread Gauges) 圓螺紋（具有間隙，深螺腹，螺距７ｍｍ之螺紋限界尺寸和偏差螺紋量規之公差和許可磨損） |
|
|
|
CNS 4546
2020 Edition limits of Sizes and Tolerances for ISO Metric Fine Screw Threads (Tolerance Quality: Fine,Tolerances: 4H、5H and 4h)(Diameters from 1 to 300mm and Pitches 0.2 to 6mm) 公制細螺紋限界尺寸及公差（ISO制）（細品級–4H、5H、4h）（標稱直徑1至300mm，螺距0.2至6mm） |
|
|
|
CNS 4544
2020 Edition limits of sizes and tolerances for ISO metric coarse screw threads (Tolerance quality: medium, tolerances: 5 H、6 H and 6 h、6 g)(Diameters from 1 to 68 mm and pitches 0.25 to 6 mm) 公制粗螺紋限界尺寸及公差（ＩＳＯ制）（中品級–5Ｈ、6Ｈ、6ｈ、6ｇ）（標稱直徑1至68mm，螺距0.25至6mm） |
|
|
|
CNS 521
2020 Edition limit of Whitworth Threads (Medium and Coarse Fits) 韋氏螺紋限界尺寸（中配及粗配） |
|
|
|
CNS 4547
2020 Edition limits of Sizes and Tolerances for ISO Metric Fine Screw Threads (Tolerance Quality: Medium,Tolerances: 6H and 6h、6g)(Diameters from 2.5 to 300mm and Pitches 0.35 to 6mm) 公制細螺紋限界尺寸及公差（ISO制）（中品級–6Ｈ、6ｈ、6ｇ）（標稱直徑2.5至300mm，螺距0.35至6mm） |
|
|
|
CNS 4319
2020 Edition ISO Miniature Screw Threads-limits of Size 公制精細小螺紋限界尺（ＩＳＯ制） |
Translated |
|
|
CNS 11259
2020 Edition Tolerances of Ball and Roller Bearings-Chamfer Dimension limits 滾動軸承公差（去角尺度之容許差） |
|
|
|
CNS 14959
2019 Edition limits for exposuring to time-varying electric, magnetic and electromagnetic fields (up to 300 GHz) 時變電場、磁場及電磁場曝露之限制值（３００ＧＨｚ以下） |
|
|
|
CNS 14940
2019 Edition limit of free formaldehyde content in textiles 紡織製品中游離甲醛之限量 |
Translated |
|
|
CNS 14934-3
2019 Edition Electromagnetic compatibility (EMC) - limits - Part 3: Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≦16A per phase and not subject to conditional connection 電磁相容－限制值－第3部：每相額定電流在16 A以下且不屬於有條件連接之設備於公共低電壓電源系統中電壓改變、電壓變動及閃爍之限制值 |
|
|
|
CNS 14934-2
2019 Edition Electromagnetic compatibility (EMC) - limits - Part 2: Limits for harmonic current emissions (equipment input current ≦16A per phase) 電磁相容－限制值－第2部：諧波電流發射（設備每相輸入電流在16 A以下）之限制值 |
|
| Find out:96Items | To Page of: First -Previous-Next -Last | 1 2 3 4 |
