環球標準網-CNS標準解決之道!
|
首頁
|
登錄
|
註冊
|
聯繫我們
|
English
|
﹛
﹛
Chinese National Standards
中華民國國家標準
-
Taiwan
台灣 -
"Pa " CNS 標準清單
K-化學工業
CNS 15040:2019
- 英文版
塗料與清漆-低VOC乳膠漆(罐內VOC)揮發性有機化合物含量之測定
Pa
ints and varnishes - Determination of the volatile organic compound content of low - VOC emulsion paints (in-can VOC)
- English Version
C-電機工程, 電子工程
CNS 60245-8:2019
- 英文版
額定電壓450/750 V 以下橡膠絕緣電纜-第8部:高可撓性用途花線
Rubber insulated cables ? Rated voltages up to and including 450/750 V ?
Pa
rt 8: Cords for applications requiring high flexibility
- English Version
C-電機工程, 電子工程
CNS 10314:2019
- 英文版
電機器具用600 V 聚乙烯絕緣電線
600 V Grade polyethylene insulated wires for electrical apparatus
- English Version
C-電機工程, 電子工程
CNS 15748-2:2019
- 英文版
積體電路- 150 kHz 至1 GHz 電磁放射量測-第2 部: 輻射放射量測- 橫向電磁波室與寬頻橫向電磁波室法
Integrated circuits – Measurement of electromagnetic emissions, 150 kHz to 1 GHz ?
Pa
rt 2: Measurement of radiated emissions ? TEM cell and wideband TEM cell method
- English Version
C-電機工程, 電子工程
CNS 15186-2:2019
- 英文版
潔淨室及其附屬之控制環境-第2部:確保持續符合CNS 15186-1之測試與監測規範
Cleanrooms and associated controlled environments –
Pa
rt 2: Specifications for testing and monitoring to prove continued compliance with CNS 15186-1
- English Version
B-機械工程
CNS 15077-3:2019
- 英文版
切削中心機之檢驗條件-第3部:具整合型分段指示或連續萬向分度頭之機器幾何檢驗(垂直Z軸)
Test conditions for machining centres -
Pa
rt 3 : Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
- English Version
C-電機工程, 電子工程
CNS 15187-3-1:2019
- 英文版
低壓熔線-第3-1部︰非專業人員用熔線之補充規定(以家用及類似用途為主之熔線)-第I章至第IV章:經標準化之熔線各種類型範例
Low-voltage fuses -
Pa
rt 3-1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - SectionsⅠto IV: Examples of types of standardized fuses
- English Version
T-衛生及醫療器材
CNS 14964-25:2019
- 英文版
輪椅-第25 部:電動輪椅之電池組及充電器
Wheelchairs ?
Pa
rt 25: Batteries and chargers for powered wheelchairs
- English Version
C-電機工程, 電子工程
CNS 13306-2-2:2019
- 英文版
射頻擾動和免疫力量測設備與量測方法-第2-2部:擾動和免疫力量測方法-擾動功率量測
Specification for radio disturbance and immunity measuring apparatus and methods -
Pa
rt 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power
- English Version
A-土木工程及建築
CNS 12285:2019
- 英文版
鋼襯預力混凝土管
Pressurized explosion-proof construction of electric machineries and apparatuses of mines ( replaced by CNS 3376-0 )
- English Version
C-電機工程, 電子工程
CNS 15130-2-2:2019
- 英文版
電纜及光纜之燃燒試驗- 第2-2部:單條小型絕緣電線或電纜之垂直火焰延燃試驗- 擴散火焰之程序
Tests on electric and optical fibre cables under fire conditions ?
Pa
rt 2-2: Test for vertical flame propagation for a single small insulated wire or cable – Procedure for diffusion flame
- English Version
C-電機工程, 電子工程
CNS 15748-5:2019
- 英文版
積體電路-150 kHz 至1 GHz 電磁放射量測-第5 部:傳導放射量測-工作台法拉第箱體法
Integrated circuits – Measurement of electromagnetic emissions, 150 kHz to 1 GHz –
Pa
rt 5: Measurement of conducted emissions – Workbench Faraday Cage method
- English Version
K-化學工業
CNS 15110:2019
- 英文版
汽油碳氫化合物類型、含氧化物及苯含量測定法(多維管柱系統式氣相層析法)
Method of test for hydrocarbon types, oxygenated compounds and benzene in spark ignition engine fuels by multi-dimensional gas chromatography
- English Version
D-機動車及航太工程
CNS 13376:2019
- 英文版
汽車用圓盤式煞車襯墊及鼓輪式煞車蹄片總成抗剪強度試驗法
Test method for brake linings shear strength of automobiles disc brake pad and drum brake shoe assemblies
- English Version
Z2-工業安全
CNS 14253-2:2019
- 英文版
個人擒墜系統?第2 部:繫索及能量吸收器
Personal fall-arrest systems ?
Pa
rt 2: Lanyards and energy absorbers
- English Version
X-資訊及通信
CNS 15252:2019
- 英文版
工業自動化系統及整合-開放系統應用整合架構-第5部:基於HDLC之控制系統參考說明
Industrial automation systems and integration - Open systems application integration framework -
Pa
rt 5: Reference description for HDLC-based control systems
- English Version
Z7-一般及其他
CNS 15755-5-6:2019
- 英文版
單位換算表-第5-6 部:壓力或應力-百萬帕斯卡與公斤力每平方公分
Conversion tables for units ?
Pa
rt 5-6: Pressure or stress ? Megapascal and kilogram-force per square centimeter
- English Version
B-機械工程
CNS 15785-6:2019
- 英文版
具圓柱柄之刀具夾持器-第6 部:具圓柱形座之E 型
Tool holders with cylindrical shank ?
Pa
rt 6: Type E with cylindrical seat
- English Version
C-電機工程, 電子工程
CNS 14587-1:2019
- 英文版
電磁相容性(EMC)--第1部:總則--第1章:術語與基本定義之應用與說明
Electromagnetic compatibility (EMC)
Pa
rt 1: General-Section 1: Application and interpretation of fundamental definitions and terms
- English Version
K-化學工業
CNS 14831:2019
- 英文版
低烯烴汽油含氧化物、飽和烴、烯烴、環烷烴及芳香烴(O-PONA)測定法(氣相層析法)
Method of test for oxygenates and paraffin , olefin , naphthene , aromatic(O-PONA)hydrocarbon types in low-olefin spark ignition engine fuels by gas chromatography
- English Version
G-鐵金屬冶煉
CNS 3666:2019
- 英文版
鋼鐵材料之磁粉探傷法
Method of Magnetic
Pa
rticle Flaw Detection Test for Ferromagnetic Materials
- English Version
X-資訊及通信
CNS 15593-62:2019
- 英文版
電力計量-讀表、計費及負載控制之資料交換-第62 部:介面類別
Electricity metering – Data exchange for meter reading, tariff and load control –
Pa
rt 62: Interface classes
- English Version
B-機械工程
CNS 5677:2019
- 英文版
起重機詞彙-第4部:起重機之機械零組件
Glossary of terms relating to cranes -
Pa
rt 4: Mechanical parts of cranes
- English Version
Z7-一般及其他
CNS 15755-5-4:2019
- 英文版
單位換算表-第5-4 部:壓力或應力-毫米汞柱與毫巴
Conversion tables for units ?
Pa
rt 5-4: Pressure or stress ? Millimeter of mercury and millibar
- English Version
L-紡織工業
CNS 15204-1:2019
- 英文版
皮革-染色皮革中特定偶氮色料的測定法-第1部:測定偶氮色料衍生之特定芳胺
Leather ? Chemical tests for the determination of certain azo colorants in dyed leathers ?
Pa
rt 1: Determination of certain aromatic amines derived from azo colorants
- English Version
B-機械工程
CNS 15660-2:2019
- 英文版
數值控制車床及車削中心機之試驗條件- 第2部:立式工件夾持主軸工具機之幾何試驗
Test conditions for numerically controlled turning machines and turning centres ?
Pa
rt 2: Geometric tests for machines with a vertical workholding spindle
- English Version
K-化學工業
CNS 10273-4:2019
- 英文版
未硫化橡膠-使用剪力-圓盤型黏度計-第4 部:木尼應力-鬆弛速率之測定
Rubber, unvulcanized ? Determinations using a shearing-disc viscometer ?
Pa
rt 4: Determination of the Mooney stress-relaxation rate
- English Version
C-電機工程, 電子工程
CNS 14934-5:2019
- 英文版
電磁相容-限制值-第5部:額定電流大於16 A之設備於低電壓電源系統中電壓變動及閃爍之限制值
Electromagnetic compatibility (EMC) - Limits -
Pa
rt 5: Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16A
- English Version
K-化學工業
CNS 14432-2:2019
- 英文版
塑膠材料在控制堆肥條件下最終好氧生物分解度測定法-二氧化碳釋出量分析法-第2部:實驗室規模重量測定法
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions ? Method by analysis of evolved carbon dioxide ?
Pa
rt 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
- English Version
S-日常用品
CNS 15562-10:2019
- 英文版
固定式訓練器材-第10部:具固定輪或無自由輪健身車之附加特定安全要求與試驗法
Stationary training equipment ?
Pa
rt 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods
- English Version
找到:
3831
條目
|
[首頁]
-
[上一頁]
-
[下一頁]
-
[尾頁]
| 去到:
[38]
[39]
[40]
[41]
[42]
[43]
[44]
|
首頁
| 常見問題 |
登錄
|
註冊
|
聯繫我們
|
English
|
© CNS-standards.org 2001-2025 版權所有
主管機關連結:
經濟部標準檢驗局
本網站非隸屬於經濟部標準檢驗局